If you are not prepared for Microsoft 70-342 exam, please don’t worry. You can pass Microsoft 70-342 exam very simply and easily with our free 70-342 dumps. With our braindumps you shall get GreatExam 70-342 PDF & VCE. After preparing from our free Microsoft 70-342 GreatExam practice test you shall not only pass this exam as well you will get good marks in very short time.
QUESTION 71
Your company has three data centers.
The data centers are located in Montreal, New York, and Seattle.
You have an Exchange Server 2013 organization that contains six servers.
The servers are configured as shown in the following table.
The organization is configured as shown in the following exhibit. (Click the Exhibit button.)
The file share witness for DAG1 is located on EX3.
You plan to implement site resiliency and use a single name space named mail.contoso.com. You need to recommend a solution to minimize the amount of time that the Exchange Server services are unavailable if either the data center in Montreal or the data center in Seattle fails. Which two tasks should you recommend performing? (Each correct answer presents part of solution. Choose two.)
A. Deploy a hardware load balancer to EX3 and EX6.
B. Create two DNS host (A) records for mail.contoso.com.
C. Configure EX6 as an alternate file share witness.
D. Move the file share witness to Server1.
Answer: AD
Explanation:
Load balancing serves two primary purposes. It reduces the impact of a single Client Access server failure within one of your Active Directory sites. In addition, load balancing ensures that the load on each of your Client Access servers is evenly distributed.
QUESTION 72
You have an Exchange Server 2013 organization.
You create a data loss prevention (DLP) policy. The mode of the DLP policy is set to Enforce.
You need to ensure that email messages containing social security numbers from the United States are blocked.
Which two possible rules achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. U.S. State Breach: Allow Override
B. U.S. State Breach: Scan email sent outside – low count
C. U.S. State Breach: Scan email sent outside – high count
D. U.S. State Breach: Scan text limit exceeded
E. U.S. State Breach: Attachment not supported
Answer: BC
Explanation:
Note:
* In Microsoft Exchange Server 2013, you can use data loss prevention (DLP) policy templates to help meet the messaging policy and compliance needs of your organization. These templates contain pre-built sets of rules that can help you manage message data that is associated with several common legal and regulatory requirements.
* DLP policy templates in Exchange include:
U.S. State Breach Notification Laws
Helps detect the presence of information subject to U.S. State Breach Notification Laws, including data like social security and credit card numbers.
http://blogs.msdn.com/b/microsoft_press/archive/2013/04/29/from-the-mvps-data-loss-prevention-with-office-365-and-exchange-online.aspx
QUESTION 73
You have an Exchange Server 2013 organization.
You purchase a Microsoft Office 365 subscription and configure a hybrid deployment.
The network contains an SMTP relay server named smarthost.contoso.com.
The server is configured to use a certificate that has a subject name of smarthost.contoso.com.
All users have Microsoft Outlook 2013 installed on their client computer.
Outlook 2013 is configured to connect to mail.contoso.com.
All Exchange servers have a certificate that has a subject name of mail.contoso.com.
You discover that email messages sent from on-premises users are not delivered to Office 365 recipients.
You discover that the Send connector for Office 365 uses a smart host of smarthost.contoso.com.
You need to ensure that the on-premises users can send email messages to the Office 365 recipients.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the Hybrid Configuration Wizard again.
B. Configure the Microsoft Exchange Online Protection (EOP) Send connector to use smarthost.contoso.com
C. Configure the centralized mail transport option.
D. Remove the smart host from the Send connector.
E. Assign a certificate that has a subject name of smarthost.contoso.com to the Send connector.
Answer: AE
Explanation:
A: Creating and configuring a hybrid deployment with the Hybrid Configuration wizard is now a single process in Microsoft Exchange Server 2013. First, the wizard creates the HybridConfiguration object in your on-premises Active Directory. This Active Directory object stores the hybrid configuration information for the hybrid deployment and is updated by the Hybrid Configuration wizard. Next, the wizard gathers existing on- premises Exchange and Active Directory topology configuration data, Office 365 tenant and Exchange Online configuration data, defines several organization parameters and then runs an extensive sequence of configuration tasks in both the on-premises and Exchange Online organizations.
E:
Note:
* By default, Microsoft Exchange Server 2013 doesn’t allow you to send mail outside of your domain. To send mail outside your domain, you need to create a Send connector.
* Use the Set-SendConnector cmdlet to modify a Send connector.
/ Parameters include TlsCertificateName
The TlsCertificateName parameter specifies the X.509 certificate to use with TLS sessions and secure mail. Valid input for this parameter is [I]Issuer[S]Subject. The Issuer value is found in the certificate’s Issuer field, and the Subject value is found in the certificate’s Subject field.
You can find these values by running the Get-ExchangeCertificate cmdlet.
Incorrect:
Not B: Microsoft Exchange Online Protection is not required here.
QUESTION 74
You have a server named Server1 that has Exchange Server 2013 installed.
Users access their mailbox by using Microsoft Outlook 2010 and Outlook Web App.
You enable auditing for all of the mailboxes.
You need to identify when a mailbox is accessed by someone other than the owner of the mailbox.
What are two possible ways to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)
A. Export the administrator audit log.
B. Run an administrator role group report.
C. Export the mailbox audit log.
D. Run a non-owner mailbox access report.
E. Review the security event log.
Answer: CD
Explanation:
C: Use the Auditing tab to run reports or export entries from the mailbox audit log and the administrator audit log.
/ The mailbox audit log records whenever a mailbox is accessed by someone other than the person who owns the mailbox. This can help you determine who has accessed a mailbox and what they have done.
/ The administrator audit log records any action, based on a Windows PowerShell cmdlet,
performed by an administrator. This can help you troubleshoot configuration issues or identify the cause of security- or compliance-related problems.
D: Run a Non-Owner Mailbox Access Report
Use this report to find mailboxes that have been accessed by someone other than the person who owns the mailbox.
QUESTION 75
Hotspot Question
Your company implements Exchange Server 2013 Unified Messaging (UM).
The company uses an auto attendant.
You need to ensure that when calls are routed to the auto attendant, callers can press 0 to reach a receptionist.
Which option should you configure from the UM Auto Attendant window? To answer, select the appropriate option in the answer area.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/bb232201%28v=exchg.141%29.aspx
QUESTION 76
Hotspot Question
You have an Exchange Server organization that contains four servers.
The servers are configured as shown in the following table.
SiteA contains an IP gateway that uses a dial plan named Dialplan1. SiteB contains a Lync Server 2013 server that uses a dial plan named Dialplan2.
You plan to migrate all Unified Messaging (UM) functionalities to Exchange Server 2013.
You need to identify which tasks must be performed to complete the migration. Which tasks should you identify? (To answer, select the tasks that are required and not required in the answer area.)
Answer:
QUESTION 77
Hotspot Question
You have an Exchange Server 2013 organization.
All users are enabled for Unified Messaging (UM) and access their voice mail by using Microsoft Lync 2010. Callers report that when they press a key to dial an external telephone number, they hear a message indicating that the intended destination cannot be reached.
You need to ensure that the callers can reach the external number successfully.
What should you modify? To answer, select the appropriate object in the answer area.
Answer:
QUESTION 78
You have an Exchange Server 2013 organization.
You successfully migrate the public folders from a previous version of Exchange Server.
You discover that one of the public folder mailboxes almost reached its quota size.
You need to move some of the public folders in the public folder mailbox to another public folder mailbox.
What should you run?
A. Update-PublicFolderMailbox
B. New-PublicFolderMoveRequest
C. New-PublicFolderMigrationRequest
D. Set-PublicFolderMailbox
Answer: B
Explanation:
You can either perform a publicfoldermoverequest, or run the splitpublicfoldermailbox.ps1 script.
* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.
* Use the New-PublicFolderMoveRequest cmdlet to begin the process of moving public folder contents between public folder mailboxes. Moving public folders only moves the physical contents of the public folder; it doesn’t change the logical hierarchy. When the move request is completed, you must run the Remove-PublicFolderMoveRequest cmdlet to remove the request or wait until the time specified in the CompletedRequestAgeLimit parameter has passed. The request must be removed before you can run another move request.
Incorrect:
Not A: Use the Update-PublicFolderMailbox cmdlet to update the hierarchy for public folders.
Not C: Use the New-PublicFolderMigrationRequest cmdlet to begin the process of migrating public folders from Microsoft Exchange Server 2007 or Exchange Server 2010 to Exchange Server 2013.
Reference: Move a Public Folder to a Different Public Folder Mailbox
QUESTION 79
Your company has three offices. Each office has 1,000 users and is configured as an Active Directory site. Each site connects directly to the Internet.
The network contains six servers that have Exchange Server 2013 installed.
The servers are configured as shown in the following table.
An administrator performs a datacenter switchover by changing the DNS record for webl.adatum.com to point to the IP address of web2.adatum.com.
Users from Main1 report that when they connect to Outlook Web App, they receive a certificate warning message.
You need to recommend a solution to ensure that the users do not receive a certificate warning message when a datacenter switchover is performed.
What should you include in the recommendation?
A. Three host headers for the Default Web Site on each Client Access server
B. One certificate that contains all of the external names as subject alternative names
C. Three certificates that each contains one of the external names
D. An external URL for each Client Access server set to $null
Answer: B
Explanation:
IRM also helps allow or restrict recipient actions such as forwarding a message to other recipients, printing a message or attachment, or extracting message or attachment content by copying and pasting.
http://technet.microsoft.com/en-us/library/dd638140%28v=exchg.150%29.aspx
QUESTION 80
You have an Exchange Server 2010 organization named adatum.com.
All public folders are stored on a server named EX5.
You deploy a new server named EX6. EX6 has Exchange Server 2013 installed.
You move all mailboxes to EX6.
You need to move the public folders to EX6. The solution must ensure that users can access the public folders after EX5 is decommissioned.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On EX6, create a public folder mailbox.
B. On EX6, run the New-PublicFolderMigrationRequest cmdlet.
C. On EX5, modify the replication partners for all of the public folders.
D. On EX6, run the New-SiteMailboxProvisioningPolicy cmdlet.
E. On EX5, assign the FolderOwner permission to the Public Folder Management management role group for all of the public folders.
F. On EX6, run the MoveAllReplicas.ps1 script.
Answer: AB
Explanation:
B: Use the New-PublicFolderMigrationRequest cmdlet to begin the process of migrating public folders from Microsoft Exchange Server 2007 or Exchange Server 2010 to Exchange Server 2013.
Note: See step 4 and 5 below.
Step 1: Download the migration scripts
Step 2: Prepare for the migration
Step 3: Generate the .csv files
Step 4: Create the public folder mailboxes on the Exchange 2013 server Step 5: Start the migration request
Example:
New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server
<Source server name>) -CSVData (Get-Content <Folder to mailbox map path> -Encoding Byte) -BadItemLimit $BadItemLimitCount
Step 6: Lock down the public folders on the legacy Exchange server for final migration (downtime required)
Step 7: Finalize the public folder migration (downtime required)
Step 8: Test and unlock the public folder migration
http://technet.microsoft.com/en-us/library/jj150538%28v=exchg.150%29.aspx#MigratePFs
QUESTION 81
You have an Exchange Server 2013 organization that contains a database available group (DAG) named DAG1. DAG1 contains three Mailbox servers named Server1, Server2, and Server3. DAG1 contains a mailbox database copy named DB1.
You implement a lagged copy of DB1 on Server3. The copy lag time is seven days.
You need to ensure that copies of successfully processed email messages are stored on Server1 and Server2 for seven days.
What should you modify?
A. The Shadow Redundancy settings
B. The Safety Net settings
C. The settings of DAG1
D. The settings of DB1
Answer: B
Explanation:
Microsoft Exchange 2013 Safety Net is a new feature in Exchange Server 2013 that prevents data loss by maintaining a queue of successfully delivered messages.
The Exchange 2013 Safety Net is essentially a delivery queue that exists on each Exchange 2013 mailbox server. Each time a message is delivered to a database, a copy of that message is held within the Safety Net. The message copy remains in the Safety Net until its expiration date, which is determined by the administrator.
QUESTION 82
You have an Exchange Server 2013 organization. All users are issued certificates from an internal certification authority (CA). Users who have a laptop can access their mailbox from the Internet by using Outlook Anywhere.
When the users attempt to view or to create digitally signed email messages while they are connected to the Internet, the users receive a warning message.
When the users use their laptop on the internal network, the users do not receive a warning message.
You need to ensure that the users can send and receive digitally signed email messages without receiving a warning message.
What should you do?
A. Publish the root certificate of the CA to a server that is accessible from the Internet.
B. Publish the certificate revocation list (CRL) to a server that is accessible from the Internet.
C. Install a trusted root CA certificate on all Client Access servers.
D. Install a trusted root CA certificate on all of the laptops.
Answer: B
Explanation:
It works inside the network. Therefore the CA is trusted. Without access to the CRL, you’ll get an error saying A revocation check could not be performed for the certificate.
http://technet.microsoft.com/nl-nl/magazine/2008.06.smime%28en-us%29.aspx
QUESTION 83
You have an Exchange Server 2013 organization.
You successfully migrate the public folders from a previous version of Exchange Server.
You discover that one of the public folder mailboxes almost reached its quota size.
You need to move some of the public folders in the public folder mailbox to another public folder mailbox. What should you run?
A. Set-PublicFolderMailbox
B. Merge PublicFolderMailbox.ps1
C. Split PublicFolderMailbox.ps1
D. New-PublicFolderMigrationRequest
Answer: C
Explanation:
You can either perform a publicfoldermoverequest, or run the splitpublicfoldermailbox.ps1 script.
* Split-PublicFolderMailbox.ps1
Splits the given public folder mailbox based on the size of the folders.
* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.
Reference: Move a Public Folder to a Different Public Folder Mailbox
QUESTION 84
Hotspot Question
Your network contains two Active Directory sites named Site1 and Site2.
You have an Exchange Server 2013 organization that contains six servers. The servers are configured as shown in the following table.
All of the mailbox databases replicate to all of the servers.
Users in Site1 connect to sitel-mail.contoso.com to access their mailbox. Users in 5ite2 connect to site2-mail.contoso.com to access their mailbox. All of the users use Microsoft Outlook 2013.
You need to identify which DNS modification must be made to fail over the email services from Site1 to Site2.
Which DNS modification should you identify? (To answer, select the appropriate record to modify and the new data for the record in the answer area.)
Answer:
QUESTION 85
Drag and Drop Question
You have an Exchange Server 2013 organization and a Microsoft Lync Server 2013 infrastructure. You plan to implement voice mail for all users.
You need to prepare the environment for the planned implementation.
Which tool should you run in each environment? (To answer, drag the appropriate tool to the correct environment or environments. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
QUESTION 86
Hotspot Question
You have an Exchange Server 2013 organization that has mailbox audit logging enabled for all
users.
You deploy two third-party applications named App1 and App2. Both applications access a
mailbox named Mailbox1.
App1 uses a mail-enabled user account named App1_user. App2 uses a mailbox-enabled user account named App2_user.
You need to prevent the audit logs from containing entries that relate to App2.
Which command should you run? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/ff461934%28v=exchg.150%29.aspx
http://technet.microsoft.com/en-us/library/c925a5ef-ed07-4c31-b074-7ac04aa709f6%28v=exchg.150%29#Examples
QUESTION 87
You have an Exchange Server 2013 organization that has Unified Messaging (UM) enabled for all mailboxes.
The organization is configured to use an IP gateway to connect to a legacy PBX.
An administrator recently performed some configuration changes. After the changes, users report that their voice mail is no longer being delivered to their Exchange Server mailbox. The users do not report any other problem.
You need to identify which configuration change causes the issue.
Which cmdlet should you run?
A. Test-UMConnectivity
B. Test-CsExUMConnectivity
C. Test-ExchangeUMCallFlow
D. Test-CsExUMVoiceMail
Answer: A
Explanation:
Use the Test-UMConnectivity cmdlet to test the operation of a Mailbox server computer running the Microsoft Exchange Unified Messaging service.
Two diagnostic tests are designed to test the operation of the Microsoft Exchange Server 2013 Mailbox server software (mode 1) and the operation of the whole system that includes the connected telephony components (mode 2).
The Test-UMConnectivity cmdlet can be used to test the operation of a Mailbox server and related connected telephony equipment. When you run this cmdlet and include the UMIPGateway parameter, the Mailbox server tests the full end-to-end operation of the Unified Messaging system. This test includes the telephony components connected to the Mailbox server, such as IP gateways, Private Branch eXchanges (PBXs), and cabling. If the UMIPGateway parameter isn’t specified, the Mailbox server tests only the operation of the Unified Messaging components that are installed and configured on the server.
Incorrect:
Not B: Test-CsExUMConnectivity
Verifies that a test user can connect to Exchange Unified Messaging. This cmdlet was introduced in Lync Server 2013.
Not C: Test-ExchangeUMCallFlow
Use the Test-ExchangeUMCallFlow cmdlet to test call flow between Client Access servers running the Microsoft Exchange Unified Messaging Call Router service, Mailbox servers running the Microsoft Exchange Unified Messaging service, VoIP gateways, IP PBXs, Session Initiation Protocol (SIP) servers and Microsoft Lync Server.
QUESTION 88
You have an Exchange Server organization. The organization contains servers that have either Exchange Server 2010 or Exchange Server 2013 installed.
You hire a new helpdesk technician named helpdesk1. Helpdesk1 is a member of the Recipient Management management role group.
You discover that helpdesk1 created nine new mailbox-enabled users by using the New-Mailbox command.
You need to identify which management role provides helpdesk1 with the permissions to create new mailbox-enabled users.
Which cmdlets should you run?
A. Get-ManagementRoleEntry and Get-ManagementRoleAssignment
B. Get-RolegroupMember and Get-ManagementRoleAssignment
C. Get-ManagementRoleEntry and Get-RoleGroup
D. Get-Rolegroup and Get-RoleGroupMember
Answer: A
Explanation:
* Use the Get-ManagementRoleEntry cmdlet to retrieve management role entries that have been configured on management roles.
* Use the Get-ManagementRoleAssignment cmdlet to retrieve management role assignments.
http://technet.microsoft.com/en-us/library/dd335210%28v=exchg.150%29.aspx
http://technet.microsoft.com/en-us/library/dd351024%28v=exchg.150%29.aspx
QUESTION 89
Drag and Drop Question
You company has offices in the United States and Germany.
Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device.
You need to ensure that callers to the German office can navigate the voice mail system menu in German.
In which sequence should you perform the actions? (To answer, move all of the actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Case Study 5: Fabrikam, Inc (QUESTION 90 ~ QUESTION 98)
Overview General
Overview
Fabrikam, Inc., is a plastics manufacturer.
Fabrikam has an Exchange Server organization that contains only servers that have Exchange Server 2013 installed.
Physical Locations
Fabrikam has two main offices. The main offices are located in Tampa and Charlotte. The company has 8,000 users in each office.
Existing Environment
Active Directory Environment
Fabrikam has an Active Directory forest that contains one domain named fabrikam.com. Each office is configured as an Active Directory site.
The network contains four subnets. The subnets are configured as shown in the following table.
All of the traffic from Subnet1 is routable to Subnet3. All of the traffic from Subnet2 is routable to Subnet4.
All client computers are on Subnet1 and Subnet3 only. Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are assigned as the MAPI network.
The network contains four domain controllers. The domain controllers are configured as shown in the following table.
Network Infrastructure
The network contains the following components:
– Two 10-gigabits per second WAN links that connect the Tampa office and the Charlotte office. The links have a latency of less than 15 ms.
– One IP-PBX that is located in the Tampa office. The IP-PBX can use only unencrypted communications.
– An Internet connection in the Tampa office and an Internet connection the Charlotte office.
Exchange Environment
The network contains six servers that have Exchange Server 2013 installed. The servers are configured as shown in the following table.
The Exchange Server environment has the following configurations:
– Two data loss prevention (DLP) policies named DLP_Finance and DLP_PII. DLP_Finance is based on a template named Financial Data – U.S. DLP_PII is based on a template named PII (U.S.).
– A mailbox database named UM that hosts only Unified Messaging (UM)-enabled mailboxes and is replicated between the Mailbox servers in the Tampa office only. -A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and EX6. DAG1 is configured to use DHCP to obtain an IP address.
– A Send connector named Tampa SMTP that uses SMTP1 as a smart host. The cost of the Tampa SMTP connector is 10.
– Mailbox servers in the Tampa office that provide outbound SMTP services to the Internet.
– A UM dial plan named UMl.
– An SMTP relay device named SMTP2 in the Charlotte office.
– An SMTP relay device named SMTP1 in the Tampa office.
– No client access services are published to the Internet.
Requirements
Exchange Server Issues
– The current Exchange Server environment has the following issues:
– Due to power failures, the Exchange servers unexpectedly fail, causing databases to fail over. During the database failovers, the preferred database is not activated, causing an unexpected distribution of active databases.
– An IRM template named No Print or Screenshot is deployed, but the template fails to prevent users from taking screenshots of email messages.
Technical Requirements
You identify the following technical requirements:
– Assign a static IP address to DAG1.
– Block all personally identifiable information (PII) data and financial data without exception.
– Prevent the forwarding of email messages sent by users who have a value of Legal in their Department field.
– Ensure that the members of a group named HR1 can search all of the mailboxes for sensitive email content.
– Use Information Rights Management (IRM) to protect all of the voice mails left for the telephone number of the human resource (HR) department.
– Implement an archiving policy that moves all of the email messages from the mailbox folders to an Archive mailbox after 30 days and permanently deletes all of the email messages after 365 days.
QUESTION 90
Hotspot Question
You need to configure transport rules to meet the technical requirements for the PII data and the financial data.
How should you configure the rules? To answer, disable the appropriate rule or rules in the answer area.
Answer:
Explanation:
I don’t see how disabling all but the two “allow override” rules is the answer.
If you want to prepare for 70-342 exam in shortest time, with minimum effort but for most effective result, you can use GreatExam 70-342 practice test which simulates the actual testing environment and allows you to focus on various sections of 70-342 exam. Our candidates walk into the testing room as confident as a Certification Administrator. So you can pass the exam without any question.
Comments are closed.