This page was exported from 100% Free Lead2pass Exam Dumps Download [ http://www.pass4surevip.com ] Export date:Wed Dec 11 16:27:27 2019 / +0000 GMT ___________________________________________________ Title: [2016-New] Easily Pass 70-341 Exam With GreatExam New Microsoft 70-341 Brain Dumps (106-120) --------------------------------------------------- There is no need to hassle if you are stuck in the 70-341 exam difficulties, GreatExam will assist you right through 70-341 exam with 70-341 PDF and VCE dumps. GreatExam delivers the most comprehensive 70-341 exam preparation material, covering each and every aspect of 70-341 exam curriculum. We ensure you 100% success in 70-341 exam. QUESTION 106Drag and Drop QuestionYou have an Exchange Server 2013 organization that contains four servers named EX1, EX2, EX3, and EX4. All of the servers are members of a database availability group (DAG) named DAG1. Each server has a copy of a mailbox database named DB1. DB1 has the following characteristics:- The replay lag time on Ex4 is set to 14 days.- Single item recovery on all of the servers is set to 14 days. - None of the servers have Volume Shadow Copy Service (VSS) backups. Ex4 has a folder named F:RDB that is used to store database files during restore operations. Twenty days ago, a user named User1 deleted an email message that had a subject of "Sales Report".You need to restore the deleted email message to the mailbox of User1. You copy the lagged database and the log files that are older than 20 days to F:RDB.Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 107Your company has three offices. Each office is configured as an Active Directory site. You have three servers that have Exchange Server 2013 installed named EX1, EX2 and EX3.All three servers have the Client Access server role and the Mailbox server role installed. The Active Directory site links and costs are configured as shown in the exhibit. (Click the Exhibit button.)Site B is designated as a hub site. EX2 fails. You discover that all email messages sent from the users in Site A to the users in Site C are queued on a server in Site A. You need to ensure that the email messages are sent to Site C as quickly as possible. What should you do first? A.    Modify the Active Directory site link costs.B.    Configure Site A as a hub site.C.    Modify the Exchange-specific site link cost.D.    Remove the hub site. Answer: D QUESTION 108Your network contains an internal network and a perimeter network. The internal network contains four offices. The perimeter network is located in a separate office. Each internal office has a direct WAN link to all other internal offices. Each of the four offices that make up the internal network is configured as an Active Directory site. The Active Directory sites and site links are configured as shown in the exhibit. (Click the Exhibit button.)Your company has an Exchange Server 2013 organization. Each site contains two servers that have the Mailbox server role and the Client Access server role installed. To the perimeter network, you deploy two servers that have Exchange Server 2010 Service Pack 2 (SP2) and the Edge Transport server role installed. You configure an Edge Subscription to Site1. You deploy a new email notification application to Site4. The application will send 25,000 email messages daily to external recipients. You need to identify which WAN links will have increased traffic from the new email application. Which WAN link or links should you identify? (Each answer presents part of the solution. Choose all that apply.) A.    The WAN link between Site4 and the perimeter networkB.    The WAN link between Site4 and Site3C.    The WAN link between Site1 and the perimeter networkD.    The WAN link between Site4 and Site1E.    The WAN link between Site4 and Site2 Answer: CEExplanation:C: the traffic will increase on the single WAN link on the perimeter network.E: The traffic will increase between Site4 and Site2 since the cost of this link (5) plus the cost of the link between Site2 and Site1 (1) is lower the cost on the direct link between Site4 and Site1 (10).Incorrect answers:Not A: There is no WAN link between Site4 and the perimeter network. Not B: The cost of the WAN link between site3 and site3 is high (10). This path will not be chosen.Not D: There is no WAN link between Site4 and Site1. QUESTION 109You have network contoso.com. contoso.com consist of AD DS Domain contoso.com. All Servers running Windows Server 2012 and all Clients running Windows 8 Pro. Server1 runs Mailbox Server Role and Client Access Server Role. You are configuring Anti-Spam Filtering on Server1. You need to ensure that all emails with words "Free Credit Check" are rejected unless the email is sent to Finance Distribution Group. You also need to ensure that all emails from partner company Domain name adatum.com bypass the Anti-Spam Filter. You run the Add-ContentFilterPhrase and add the words "Free Credit Check" What should you do next? A.    Run the Set-TransportConfig and Set-ContentFilterConfigB.    Run the Set-SenderReputationConfig and Set-TransportConfigC.    Run the Set-ContentFilterConfig and Set-RecipientFilterConfigD.    Run the Set-SenderFilterConfig and Set-RecipientFilterConfig Answer: AExplanation:http://technet.microsoft.com/en-gb/library/bb201691(v=exchg.150).aspxhttp://www.jaapwesselius.com/2013/01/10/installing-exchange-server-2013-part-iii/http://zaliasrobotas.blogspot.co.uk/2013/11/how-to-enable-and-configure-spam-filter.htmlhttp://www.techieshelp.com/exchange-2013-enable-anti-spam/ QUESTION 110You are evaluating the implementation of a Database Availability Group (DAG). You need to recommend changes to the planned implementation to minimize the loss of large email messages if a single DAG member fails. What should you recommend changing? A.    The preference of the mail exchanger (MX) recordsB.    The duration of single item recoveryC.    The intervals of shadow redundancyD.    The size of the transport dumpster Answer: CExplanation:Shadow redundancy intervals will need to be ammendedSafetyNet is a component of Shadow Redundancy. -> .http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspxExample 1:ShadowResubmitTimeSpan on Set-TransportConfig3 hoursHow long a server waits before deciding that a primary server has failed and assumes ownership of shadow messages in the shadow queue for the primary server that's unreachable.Example 2:SafetyNetHoldTime on Set-TransportConfig2 daysHow long successfully processed messages are retained in Safety Net. Unacknowledged shadow messages eventually expire from Safety Net after the sum of SafetyNetHoldTime and MessageExpirationTimeout on Set-TransportService. QUESTION 111A user fails to connect to his mailbox by using Outlook Anywhere. The user successfully connects to the mailbox by using an Exchange ActiveSync-enabled mobile device and Outlook Web App. You need to identify what prevents the users from connecting to the mailbox by using Outlook Anywhere. Which tool should you use? A.    Microsoft Outlook Connectivity TestB.    Microsoft Exchange RPC ExtractorC.    Microsoft Exchange Server Profile AnalyzerD.    Exchange Server MAPI Editor Answer: AExplanation:Outlook Web AppYou can use Outlook Web App to access your Office 365 or other Microsoft Exchange-based email account via a web browser.The URL (web address) you'll use to sign in to Outlook Web App depends on the type of account you have.Outlook Web App can be used to access any email account that's hosted on a server that's running Microsoft Exchange Server 2013.Mobile devices that are enabled for Microsoft Exchange ActiveSync let users access most of their Microsoft Exchange mailbox data any time, anywhere.There are many different mobile phones and devices enabled for Exchange ActiveSync. These include Windows Phones, Nokia mobile phones, Android phones and tablets, and the Apple iPhone, iPod, and iPad.Although both phone and non-phone mobile devices support Exchange ActiveSync, in most Exchange ActiveSync documentation, we use the term mobile device. Unless the feature or features we're discussing require a cellular telephone signal, such as SMS message notification, the term mobile device applies to both mobile phones and other mobile devices such as tablets.EXCHANGE SERVER SETTINGS:Outlook Anywhere (RPC over HTTP) allows you to use Outlook to connect to your Exchange server from remote locations without first connecting to the VPN. You can also/alternatively, use Outlook Web Access by logging in at https://xmail.bu.edu/or www.bu.edu/webmail.For remote connections, Outlook offers Outlook Anywhere, an alternative to VPN connections that allows you to use Outlook just as you normally do at your organization, without the need for any special connections or hardware, such as smart cards and security tokens. Outlook can connect to Exchange through the Internet by using remote procedure call (RPC) over HTTP. The Outlook Anywhere feature allows you to access your Exchange account remotely from the Internet when you are working outside your organization's firewall.Test Outlook Anywhere Connectivityhttp://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspxApplies to: Exchange Server 2013You can test for end-to-end client Outlook Anywhere connectivity by using either the Shell or the Exchange Remote Connectivity Analyzer (ExRCA). This includes testing for connectivity through the Autodiscover service, creating a user profile, and signing in to the user's mailbox. All the required values are retrieved from the Autodiscover service.Exchange Remote Connectivity Analyzer (ExRCAThe Exchange Remote Connectivity Analyzer (ExRCA) is a web-based tool designed to test connectivity with a variety of Exchange protocols. You can access the ExRCA https://www.testexchangeconnectivity.com/The Microsoft Exchange Remote Connectivity Analyzer (ExRCA) can help you confirm that connectivity for your Exchange servers is configured correctly and diagnose any connectivity issues. The Remote Connectivity Analyzer website offers tests for Microsoft Exchange ActiveSync, Exchange Web Services, Microsoft Outlook, and Internet email.Use the Shell to test Outlook Anywhere connectivityTo use the Shell to test Outlook Anywhere connectivity, use the Test-OutlookConnectivity cmdlet.Run the following command.Test-OutlookConnectivity -ProbeIdentity 'OutlookMailboxDeepTestProbe' -MailboxId tony@contoso.com-Hostnamecontoso.comNOT BThe Microsoft Exchange RPC Extractor is a command-line tool that can parse network captures and interpret remote procedure calls made from a client to Microsoft Exchange Server. RPX uses the information provided in the Microsoft Exchange Server protocol documentation to parse RPCs, remote operations (ROPs), and the parameters for each ROP.NOT CThe Microsoft Exchange Server Profile Analyzer tool lets administrators collect estimated statistical information from a single mailbox store or across an Exchange Server organization. You can use the collected data to perform the following operations:- Analyze the performance and health of a mailbox server.- Improve capacity planning models.- Improve testing methodologies and tools.- Improve future client and server products.NOT DUse the Microsoft Exchange MAPI Editor to view and modify the contents of a Messaging API (MAPI) store directly.http://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx QUESTION 112You have an Exchange Server 2013 organization.A user named User1 has a mailbox that is enabled for Unified Messaging (UM). User1 has nine call answering rules.When User1 attempts to create a new call answering rule, the user receives an error message.You need to identify what prevents User1 from creating a call answering rule.What should you identify? A.    The mailbox of User1 has the CallAnsweringRulesEnabled parameter set to $falseB.    The UM mailbox policy of User1 has the AllowCallAnsweringRules parameter set to $false.C.    User1 exceeds the Inbox rules storage quota.D.    User1 has the maximum number of call answering rules allowed. Answer: D QUESTION 113Your company has a main office and a branch office. An Active Directory site exits for each office.The offices are connected by a WAN link.You plan to deploy Exchange Server 2013 in each site.You need to identify the number of Exchange servers required to meet the following requirements:- Maintain user access to mailboxes if a single server fails- Use the minimize account of Exchange servers in each siteHow many servers should you deploy in each site? A.    1B.    2C.    3D.    4 Answer: B QUESTION 114Hotspot QuestionYou need to recommend which script the administrators must run to create the reports required to meet the technical requirements. Which script should you recommend? To answer, select the appropriate script in the answer area.Answer: QUESTION 115You need to create an exclusion for two helpdesk RBAC (Role Based Access Control) groups to not have access to managers. You will need to pick 3 powershell commands from the available choices A.    New-ManagementRole, New-ManagementScope,Set-ManagementScope (Guessed)B.    New-ManagementScope, RecipientRestrictionFilter ,New-ManagementRoleAssignment (Guessed)C.    New-ManagementScope, New-ManagementRoleAssignment, CustomRecipientWriteScope (Guessed)D.    Unsure of commands and correct answer Answer: CExplanation:Only chose C as Microsoft recommends that you:- define the scope,- then the role,- then the role group, and finally,- the role assignment.However it appears that the custom scope with a recipient filter has to be created in order to filter the scope for the 2 helpdesk role based access groups.The scope, role, and role group assignments are linked by the role assignment itself. Microsoft recommends that you first define the scope, then the role, then the role group, and, finally, the role assignment.users assigned the management role. In general, a management role indicates what you can create or modify, and a management role scope indicates where you can create or modify. Regular scopes can be either implicit or explicit scopes, both of which are discussed later in this topic. Exclusive An exclusive scope behaves almost the same as a regular scope. The key difference is that it enables you to deny users access to objects contained within the exclusive scope if those users aren't assigned a role associated with the exclusive scope. All exclusive scopes are explicit scopes, which are discussed later in this topic.Scopes can be inherited from the management role, specified as a predefined relative scope on a management role assignment, or created using custom filters and added to a management role assignment. Scopes inherited from management roles are called implicit scopes while predefined and custom scopes are called explicit scopes. The following sections describe each type of scope:- Implicit Scopes- Explicit Scopes- Predefined Relative Scopes- Custom Scopes- Recipient Filter Scopes- Configuration ScopesEach role can have the following types of scopes:Recipient read scope The implicit recipient read scope determines what recipient objects the user assigned the management role is allowed to read from Active Directory. Recipient write scope The implicit recipient write scope determines what recipient objects the user assigned the management role is allowed to modify in Active Directory. Configuration read scope The implicit configuration read scope determines what configuration objects the user assigned the management role is allowed to read from Active Directory.Configuration write scope The implicit configuration write scope determines what organizational, database, and server objects the user assigned the management role is allowed to modify in Active Directory.Recipient objects include mailboxes, distribution groups, mail enabled users, and other objects. Configuration objects include servers running Microsoft Exchange Server 2013, and databases located on servers running Exchange. Each type of scope can be either an implicit scope or explicit scope.Role Based Access Control GroupsRole Based Access Control (RBAC) is the permissions model used in Microsoft Exchange Server 2013. With RBAC, you don't need to modify and manage access control lists (ACLs), which was done in Exchange Server 2007.ACLs created several challenges in Exchange 2007, such as modifying ACLs without causing unintended consequences, maintaining ACL modifications through upgrades, and troubleshooting problems that occurred due to using ACLs in a nonstandard way. RBAC enables you to control, at both broad and granular levels, what administrators and end-users can do. RBAC also enables you to more closely align the roles you assign users and administrators to the actual roles they hold within your organization. In Exchange 2007, the server permissions model applied only to the administrators who managed the Exchange 2007 infrastructure. In Exchange 2013, RBAC now controls both the administrative tasks that can be performed and the extent to which users can now administer their own mailbox and distribution groups.RBAC has two primary ways of assigning permissions to users in your organization, depending on whether the user is an administrator or specialist user, or an end-user:management role groups and management role assignment policies. Each method associates users with the permissions they need to perform their jobs. A third, more advanced method, direct user role assignment, can also be usedBuilt-in Role GroupsMicrosoft Exchange Server 2013 includes several management role groups by default. The following built-in role groups provide you with a preconfigured set of roles that you can assign to various administrator and specialist users in your organization.Organization ManagementView-Only Organization ManagementRecipient ManagementUM ManagementHelp DeskHygiene ManagementCompliance ManagementRecords ManagementDiscovery ManagementPublic Folder ManagementServer ManagementDelegated SetupHow to use -Exclude switch in Remove-Item cmdlet in PowerShell today i was trying to remove some junk folders and files in a specific folder. But i don't want to remove all of file and folder , i want to keep few folders. Then i think that i should use the -Exclude switch with Remove-Item Cmdlet.I tried to use -Exclude switch but somehow i failed to get it working because i don't know the exact patter used by -Exclude switch. After few minutes of testing i get it done and i thought i should share this tip with you.$Lenovo = "D:P-TempLenovo*"Remove-Item -Recurse -Path $Lenovo -Exclude system,temp,updates.ser,"*.xml" -Verbose -ForceIn $Lenovo variable i specified the folder path in which I want to remove the items I want to Exclude folder name "System","temp" and file name "updates.ser" and all .XML Filesin -Exclude switch give the folder name which you don't want to delete, no need to put the in a double quotes "" in folder name . You can provide multiple folder name separated by comma.in pattern matching make sure you put the wild cards in double quotes "".POWERSHELL COMMMANDSNew-ManagementScope (Example)http://technet.microsoft.com/en-us/library/dd335137(v=exchg.150).aspxEXAMPLE 4This example creates the Protected Exec Users exclusive scope. Users that contain the string "VP" in their title match the recipient filter for the scope. When the exclusive scope is created, all users are immediately blocked from modifying the recipients that match the exclusive scope until the scope is associated with a management role assignment. If other role assignments are associated with other exclusive scopes that match the same recipients, those assignments can still modify the recipients. New-ManagementScope -Name "Protected Exec Users" -RecipientRestrictionFilter { Title -Like "*VP*" } -ExclusiveNew-ManagementRoleAssignmentThe exclusive scope is then associated with a management role assignment that assigns the Mail Recipients management role to the Executive Administrators role group. This role group contains administrators who are allowed to modify the mailboxes of high-profile executives. Only the administrators of the Executive Administrators role group can modify users with the string "VP" in their title.New-ManagementRoleAssignment -SecurityGroup "Executive Administrators" -Role "Mail Recipients" -CustomRecipientWriteScope "Protected Exec Users"This example assigns the Eng Help Desk role to the Eng HD Personnel role group. The assignment restricts the recipient write scope of the role to the contoso.com/Engineering/Users OU. Users who are members of the Eng HD Personnel role group can only create, modify, or remove objects contained within that OU. New-ManagementRoleAssignment -Role "Eng Help Desk" -SecurityGroup "Eng HD Personnel" –RecipientOrganizationalUnitScope contoso.com/Engineering/UsersNew-ManagementRoleUse the New-ManagementRole cmdlet to create a management role based on an existing role or create an unscoped management role.EXAMPLE 1This example creates the management role Redmond Journaling View-Only based on the Journaling parent role.New-ManagementRole -Name "Redmond Journaling View-Only" -Parent JournalingNew-RoleGroupUse the New-RoleGroup cmdlet to create a management role group on a server running Microsoft Exchange Server 2013.EXAMPLE 1This example creates a role group. The Mail Recipients and Mail Enabled Public Folders roles are assigned to the role group, and the users Kim and Martin are added as members. Because no scopes were provided, Kim and Martin can manage any recipient and reset passwords for any users in the organization.New-RoleGroup -Name "Limited Recipient Management" -Roles "Mail Recipients", "Mail Enabled Public Folders" -Members Kim, MartinLook here:Understanding Management Role Scopeshttp://technet.microsoft.com/en-us/library/dd335146(v=exchg.150).aspxAs we need to set deny access we want to set explicit recipcient filter scope for the existing helpdesk group, removing the managers from the scope. Then create a new RBAC group and implicit scope the managers mailboxes. So my guess would be something likeNew-ManagementRole -Name "Management role for CEO" New-ManagementScope -Name "Management Scope for CEO" -RecipientRestrictionFilter { Title -Like "*CEO*" } -ExclusiveSet-ManagementScope "Helpdesk Users" -RecipientRestrictionFilter { Company -eq 'Contoso users' -and Function -like 'CEO'As we do not know what RBAC setup already exists, this kind of smells like Microsoft, but hey this is a start. QUESTION 116You have an Exchange Server 2013 organization that contains five servers. Your company has a finance department, a marketing department, and a research department. Users in the marketing department are prevented from creating more than two Exchange ActiveSync device associations. You have a user named User5 in the finance department. You need to prevent User5 from creating more than two Exchange ActiveSync device associations. Which cmdlet should you use? A.    Set-ThrottlingPolicyAssociationB.    Set-ResourcePolicyC.    Set-ActiveSyncMailboxPolicyD.    Set-CASMailbox Answer: AExplanation: Set-ThrottlingPolicyAssociation: Exchange 2013 Help Set-ThrottlingPolicy: Exchange 2013 Help QUESTION 117You have an Exchange Server 2013 organization named for Contoso. A user named Admin1 is a member of the Domain Admins group. Admin1 fails to synchronize a new Windows Phone device by using Exchange ActiveSync and receives an HTTP 500 error message. Admin1 successfully logs on to Outlook Web App and Outlook Anywhere. You need to ensure that Admin1 can synchronize the new Windows Phone device by using Exchange ActiveSync.What should you do? A.    Install a trusted root certificate on the Windows Phone device.B.    Create a new mobile device mailbox policy.C.    Enable permission inheritance on the Admin1 user account.D.    Disable permission inheritance on the Admin1 user account. Answer: CExplanation:Mobile device mailbox policyIn Microsoft Exchange Server 2013, you can create mobile device mailbox policies to apply a common set of policies or security settings to a collection of users. After you deploy Exchange ActiveSync in your Exchange 2013 organization, you can create new mobile device mailbox policies or modify existing policies. When you install Exchange 2013, a default mobile device mailbox policy is created. All users are automatically assigned this default mobile device mailbox policy.NOT AIt is possible to save a digital certificate to a file and install a digital certificate on a Windows Mobile phone.Microsoft Exchange ActiveSync enables a variety of mobile phones to synchronize with an Exchange mailbox.A digital certificate might need to be installed on a user's mobile phone if Exchange ActiveSync is required to use Secure Sockets Layer (SSL) and your organization uses a certificate that isn't from a trusted commercial certification authority (CA).No mention of SSL in this questionNOT BThis is a permission inheritance issue.NOT DNeed to enable permission inheritance not disable it or leave it as disabled.C QUESTION 118You have an Exchange Server 2013 organization that contains a server named EX1. Your network contains a non-critical internal application that regularly connects to the POP3 Service on EX1. Users report that Outlook Web App performs more slowly than usual. You discover that EX1 frequently has a CPU utilization that is greater than 85 percent. You need to configure EX1 temporarily to allocate more processor resources to Outlook Web App and to allocate less processor resources to POP3. Which two new policies should you create? (Each correct answer presents part of the solution. Choose two.) A.    a throttling policy that sets OWAMaxConcurrency to 25B.    a workload policy for POP3 that sets the WorkloadClassification to DiscretionaryC.    a workload policy for Outlook Web App that sets the WorkloadClassification to DiscretionaryD.    a throttling policy that sets PopMaxConcurrency to 25E.    a workload policy for POP3 that sets the WorkloadClassification to CustomerExpectationF.    a workload policy for Outlook Web App that sets the WorkloadClassification to CustomerExpectation Answer: BFExplanation:A workload policyAn Exchange workload is an Exchange Server feature, protocol, or service that's been explicitly defined for the purposes of Exchange system resource management. Each Exchange workload consumes system resources such as CPU, mailbox database operations, or Active Directory requests to run user requests or background work. Examples of Exchange workloads include Outlook Web App, Exchange ActiveSync, mailbox migration, and mailbox assistants.There are two ways to manage Exchange workloads: by monitoring the health of system resources or by controlling how resources are consumed by individual users (sometimes called user throttling in Exchange 2010).Managing workloads based on the health of system resources is new in Microsoft Exchange Server 2013.Controlling how resources are consumed by individual users was possible in Exchange Server 2010, and this capability has been expanded for Exchange Server 2013. You can customize the workload management settings if you want to change the default behavior of the feature for the needs of your environment.Workload classificationsEach Exchange workload (for example, the Calendar Synchronization Assistant workload), is assigned a classification.Workload policy settings are used to group each workload into a class. Classification is used to control both priority and target resource usage.Exchange workloads can be assigned one of the following classifications:UrgentCustomer ExpectationInternal MaintenanceDiscretionaryWorkloads in a higher classification group are given preference as resource health shows signs of degrading.For example, when a resource such as local server CPU reaches high usage, workloads classified as InternalMaintenance may continue to run, while workloads classified as Discretionary may be stopped.NOT A DA throttling policy is related to Exchange 2010NOT CDo not need to allocate less priority to Outlook Web App, but more NOT EPOP3 is allocated too much resources with a WorkloadClassification of CustomerExpectation Correct Answer BNeed to allocate less priority to POP3Correct Answer FOutlook Web App is allocated the appropriate amount of resources with a WorkloadClassification of CustomerExpectation QUESTION 119Hotspot QuestionYour company has an Exchange Server 2013 organization. The company hires 200 temporary employees. You create a mailbox for each temporary employee. You create a new management role named CustomBaseOptions that uses MyBaseOptions as a parent. You create a new management role named CustomContactlnfo that uses MyContactlnfo as a parent. You plan to apply the new management roles to the temporary employees. You need to identify which management roles must be modified to prevent the temporary employees from performing the following task:- Adding a user photo- Viewing delivery reports- Viewing the Install Apps feature- Changing the value of the office locationWhich management roles should you identify? To answer, select the appropriate management role for each task in the answer area.Answer: Explanation:ADDING A USER PHOTOMyBaseOptionsView and modify the basic configuration of their own mailbox and associated settings.VIEWING DELIVERY REPORTSMyBaseOptions includes the following delivery reports information Delivery SuccessDelivery FailureEmail submission from the senders mailboxMessage was read etc...VIEWING THE INSTALL APPS FEATUREMyBaseOptionsView and modify the basic configuration of their own mailbox and associated settings.CHANGING THE VALUE OF THE OFFICE LOCATIONThe MyContactInformation management role enables individual users to modify their contact information, including address and phone numbers. QUESTION 120You have an Exchange Server 2013 organization.You are troubleshooting an email delivery problem.You need to disable temporarily the antimalware scanning on a server that has Exchange Server 2013 installed. The solution must ensure that the antimalware engine continues to download updates.What should you run? A.    the Set-TransportConfig cmdletB.    the Disable-Antimalwarescanning.psl scriptC.    the New-MalwareFilterPolicy cmdletD.    the Set-MalwareFilteringServer cmdlet Answer: DExplanation:Disable or Bypass Anti-Malware ScanningImportant:Bypassing malware filtering should only be done when troubleshooting a problem. You should restore malware filtering after you have finished troubleshooting. To temporarily bypass malware filtering, run the following command:Set-MalwareFilteringServer <ServerIdentity> -BypassFiltering $true To restore malware filtering, run the following command:Set-MalwareFilteringServer <ServerIdentity> -BypassFiltering $false We highly recommend our 70-341 dumps. Comparing with others', GreatExam is the most credible and authentic source of information on 70-341 exam and we strive to keep our 70-341 dumps up-to-date and reliable on a consistent basis. Our exam preparation material is rich in variety. We offer 70-341 PDF format and 70-341 practice test with free VCE player. That's the reason why many candidates choose GreatExam. http://www.greatexam.com/70-341-exam-questions.html --------------------------------------------------- Images: http://examgod.com/geimages/531165a1af9b_80AE/1061_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1062_thumb.png http://examgod.com/geimages/531165a1af9b_80AE/1071_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1081_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1141_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1142_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1191_thumb.jpg http://examgod.com/geimages/531165a1af9b_80AE/1192_thumb.jpg --------------------------------------------------- --------------------------------------------------- Post date: 2016-04-22 02:46:19 Post date GMT: 2016-04-22 02:46:19 Post modified date: 2016-04-22 02:46:19 Post modified date GMT: 2016-04-22 02:46:19 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com