2017 July Fortinet Official New Released NSE4 Dumps in Lead2pass.com!
100% Free Download! 100% Pass Guaranteed!
Your worries about NSE4 exam completely no more exist, because Lead2pass is here to serves as a guide to help you pass the exam. Lead2pass offers the latest NSE4 PDF and VCE dumps with the new version VCE player for free download. All the NSE4 exam questions and answers are the latest and cover every aspect of NSE4 exam. It 100% ensures you pass the exam without any doubt.
Following questions and answers are all new published by Fortinet Official Exam Center: https://www.lead2pass.com/nse4.html
A FortiGate interface is configured with the following commands:
What statements about the configuration are correct? (Choose two.)
A. IPv6 clients connected to port1 can use SLAAC to generate their IPv6 addresses.
B. FortiGate can provide DNS settings to IPv6 clients.
C. FortiGate can send IPv6 router advertisements (RAs.)
D. FortiGate can provide IPv6 addresses to DHCPv6 client.
Which of the following Fortinet hardware accelerators can be used to offload flow-based antivirus inspection? (Choose two.)
Under what circumstance would you enable LEARN as the Action on a firewall policy?
A. You want FortiGate to compile security feature activity from various security-related logs, such as virus and attack logs.
B. You want FortiGate to monitor a specific security profile in a firewall policy, and provide recommendations for that profile.
C. You want to capture data across all traffic and security vectors, and receive learning logs and a report with recommendations.
D. You want FortiGate to automatically modify your firewall policies as it learns your networking behavior.
What methods can be used to deliver the token code to a user who is configured to use two-factor authentication? (Choose three.)
A. Code blocks
B. SMS phone message
D. Browser pop-up window
You are tasked to architect a new IPsec deployment with the following criteria:
– There are two HQ sites that all satellite offices must connect to.
– The satellite offices do not need to communicate directly with other satellite offices.
– No dynamic routing will be used.
– The design should minimize the number of tunnels being configured.
Which topology should be used to satisfy all of the requirements?
C. Partial mesh
D. Fully meshed
View the exhibit. Which of the following statements are correct? (Choose two.)
A. This is a redundant IPsec setup.
B. The TunnelB route is the primary one for searching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
C. This setup requires at least two firewall policies with action set to IPsec.
D. Dead peer detection must be disabled to support this type of IPsec setup.
Which statements about DNS filter profiles are true? (Choose two.)
A. They can inspect HTTP traffic.
B. They must be applied in firewall policies with SSL inspection enabled.
C. They can block DNS request to known botnet command and control servers.
D. They can redirect blocked requests to a specific portal.
An administrator needs to offload logging to FortiAnalyzer from a FortiGate with an internal hard drive.
Which statements are true? (Choose two.)
A. Logs must be stored on FortiGate first, before transmitting to FortiAnalyzer
B. FortiGate uses port 8080 for log transmission
C. Log messages are transmitted as plain text in LZ4 compressed format (store-and-upload method).
D. FortiGate can encrypt communications using SSL encrypted OFTP traffic.
Which of the following statements describe WMI polling mode for FSSO collector agent? (Choose two.)
A. The collector agent does not need to search any security event logs.
B. WMI polling can increase bandwidth usage with large networks.
C. The NetSessionEnum function is used to track user logoffs.
D. The collector agent uses a Windows API to query DCs for user logins.
An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.)
A. The interface has been configured for one-arm sniffer.
B. The interface is a member of a virtual wire pair.
C. The operation mode is transparent.
D. The interface is a member of a zone.
E. Captive portal is enabled in the interface.
View the example routing table. Which route will be selected when trying to reach 10.20.30.254?
A. 10.20.30.0/26 [10/0] via 172.20.168.254, port2
B. The traffic will be dropped because it cannot be routed.
C. 10.20.30.0/24 [10/0] via 172.20.167.254, port3
D. 0.0.0.0/0 [10/0] via 172.20.121.2, port1
When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request?
A. The FortiGate unit’s public IP address
B. The FortiGate unit’s internal IP address
C. The remote user’s virtual IP address
D. The remote user’s public IP address
What is FortiGate’s behavior when local disk logging is disabled?
A. Only real-time logs appear on the FortiGate dashboard.
B. No logs are generated.
C. Alert emails are disabled.
D. Remote logging is automatically enabled.
What traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.)
A. Traffic to inappropriate web sites
B. SQL injection attacks
C. Server information disclosure attacks
D. Credit card data leaks
E. Traffic to botnet command and control (C&C) servers
Which statements about One-to-One IP pool are true? (Choose two.)
A. It allows configuration of ARP replies.
B. It allows fixed mapping of an internal address range to an external address range.
C. It is used for destination NAT.
D. It does not use port address translation.
Which statements correctly describe transparent mode operation? (Choose three.)
A. All interfaces of the transparent mode FortiGate device must be on different IP subnets.
B. The transparent FortiGate is visible to network hosts in an IP traceroute.
C. It permits inline traffic inspection and firewalling without changing the IP scheme of the network.
D. Ethernet packets are forwarded based on destination MAC addresses, not IP addresses.
E. The FortiGate acts as transparent bridge and forwards traffic at Layer-2.
View the exhibit. What is the effect of the Disconnect Cluster Member operation as shown in the exhibit? (Choose two.)
A. The HA mode changes to standalone.
B. The firewall policies are deleted on the disconnected member.
C. The system hostname is set to the FortiGate serial number.
D. The port3 is configured with an IP address for management access.
What step is required an SSL VPN to access to an internal server using port forward mode?
A. Configure the virtual IP addresses to be assigned to the SSL VPN users.
B. Install FortiClient SSL VPN client
C. Create a SSL VPN realm reserved for clients using port forward mode.
D. Configure the client application to forward IP traffic to a Java applet proxy.
View the exhibit. This is a sniffer output of a telnet connection request from 172.20.120.186 to the port1 interface of FGT1.
In this scenario. FGT1 has the following routing table:
Assuming telnet service is enabled for port1, which of the following statements correctly describes why FGT1 is not responding?
A. The port1 cable is disconnected.
B. The connection is dropped due to reverse path forwarding check.
C. The connection is denied due to forward policy check.
D. FGT1’s port1 interface is administratively down.
An administrator needs to be able to view logs for application usage on your network. What configurations are required to ensure that FortiGate generates logs for application usage activity? (Choose two.)
A. Enable a web filtering profile on the firewall policy.
B. Create an application control policy.
C. Enable logging on the firewall policy.
D. Enable an application control security profile on the firewall policy.
A company needs to provide SSL VPN access to two user groups. The company also needs to display different welcome messages on the SSL VPN login screen for both user groups.
What is required in the SSL VPN configuration to meet these requirements?
A. Two separated SSL VPNs in different interfaces of the same VDOM
B. Different SSL VPN realms for each group
C. Different virtual SSLVPN IP addresses for each group
D. Two firewall policies with different captive portals
Pass NSE4 exam with the latest Lead2pass NSE4 dumps. Lead2pass NSE4 exam questions and answers in PDF are prepared by our expert. Moreover, they are based on the recommended syllabus that cover all the NSE4 exam objectives. Comparing with others’, you will find our NSE4 exam questions are more helpful and precise since all the NSE4 exam content is regularly updated and has been checked for accuracy by our team of Fortinet expert professionals. Welcome to choose.
NSE4 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDekttUlJhSlRTZ1E
2017 Fortinet NSE4 exam dumps (All 360 Q&As) from Lead2pass:
https://www.lead2pass.com/nse4.html [100% Exam Pass Guaranteed]